zweiter prozessor und /proc/cpuinfo
Andre Dirr
ad at ordix.de
Die Dez 3 10:12:45 CET 2002
At 03.12.2002 10:00, Frank Loeffler wrote:
>Ich glaube mal gelesen zu haben, man sollte CPUs mit gleichem Stepping
>benutzen. Das koennte also das Problem sein, muss es aber nicht.
>Schick mal noch dmesg bitte (den CPU-Teil am Anfang).
hallo,
was könnte das mit dem Stepping für Auswirkungen haben? Hat da einer Erfahrung?
Zurück zum Problem. Schicke hier die komplette dmesg, da ich echt zu blind
bin, da was mit cpu zu finden, ausser der teil, der bei eth0 steht.
gruss, andy
#dmesg
Queue Depth: 128, Maximum Blocks per Command: 128
DAC960#0: Driver Queue Depth: 127, Scatter/Gather Limit: 33 of 33 Segments
DAC960#0: Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63
DAC960#0: SAF-TE Enclosure Management Enabled
DAC960#0: Physical Devices:
DAC960#0: 0:0 Vendor: SEAGATE Model: ST318404LC Revision: 3251
DAC960#0: Serial Number: 3BT2BTYS00007114QDPW
DAC960#0: Disk Status: Online, 35428352 blocks
DAC960#0: 0:1 Vendor: SEAGATE Model: ST318404LC Revision: 3251
DAC960#0: Serial Number: 3BT2BTBV000021370JSP
DAC960#0: Disk Status: Online, 35428352 blocks
DAC960#0: 0:7 Vendor: MYLEX Model: DAC1164P Revision: 0507
DAC960#0: Serial Number:
DAC960#0: 0:8 Vendor: SDR Model: GEM318 Revision: 0
DAC960#0: 1:0 Vendor: FUJITSU Model: MAJ3364MC Revision: 5207
DAC960#0: Serial Number: 50019170
DAC960#0: Disk Status: Online, 71063552 blocks
DAC960#0: 1:1 Vendor: FUJITSU Model: MAJ3364MC Revision: 5207
DAC960#0: Serial Number: 50019385
DAC960#0: Disk Status: Online, 71063552 blocks
DAC960#0: 1:2 Vendor: FUJITSU Model: MAJ3364MC Revision: 5207
DAC960#0: Serial Number: 50019131
DAC960#0: Disk Status: Online, 71063552 blocks
DAC960#0: 1:7 Vendor: MYLEX Model: DAC1164P Revision: 0507
DAC960#0: Serial Number:
DAC960#0: 1:8 Vendor: FSC Model: STM/LC-S Revision: 0
DAC960#0: 2:7 Vendor: MYLEX Model: DAC1164P Revision: 0507
DAC960#0: Serial Number:
DAC960#0: Logical Drives:
DAC960#0: /dev/rd/c0d0: RAID-1, Online, 35428352 blocks, Write Thru
DAC960#0: /dev/rd/c0d1: RAID-5, Online, 142127104 blocks, Write Thru
(scsi0) <Adaptec AHA-294X Ultra SCSI host adapter> found at PCI 0/3/0
(scsi0) Wide Channel, SCSI ID=7, 16/255 SCBs
(scsi0) Cables present (Int-50 NO, Int-68 NO, Ext-68 YES)
(scsi0) Downloading sequencer code... 436 instructions downloaded
sym53c8xx: at PCI bus 1, device 5, function 0
sym53c8xx: 53c1010 detected with Symbios NVRAM
sym53c8xx: at PCI bus 1, device 5, function 1
sym53c8xx: 53c1010 detected with Symbios NVRAM
sym53c1010-0: rev 0x1 on pci bus 1 device 5 function 0 irq 24
sym53c1010-0: Symbios format NVRAM, ID 7, Fast-80, Parity Checking
sym53c1010-0: on-chip RAM at 0xf5000000
sym53c1010-0: restart (scsi reset).
sym53c1010-0: handling phase mismatch from SCRIPTS.
sym53c1010-0: Downloading SCSI SCRIPTS.
sym53c1010-1: rev 0x1 on pci bus 1 device 5 function 1 irq 25
sym53c1010-1: Symbios format NVRAM, ID 7, Fast-80, Parity Checking
sym53c1010-1: on-chip RAM at 0xf4000000
sym53c1010-1: restart (scsi reset).
sym53c1010-1: handling phase mismatch from SCRIPTS.
sym53c1010-1: Downloading SCSI SCRIPTS.
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.33/3.2.4
<Adaptec AHA-294X Ultra SCSI host adapter>
scsi1 : sym53c8xx-1.7.1-20000726
scsi2 : sym53c8xx-1.7.1-20000726
scsi : 3 hosts.
Vendor: NSM Model: NSM3000 Rev: 1130
Type: Medium Changer ANSI SCSI revision: 02
Vendor: PLEXTOR Model: CD-R PX-W1210S Rev: 1Y02
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 4, lun 0
(scsi0:0:4:1) Synchronous at 10.0 Mbyte/sec, offset 15.
Vendor: HITACHI Model: DVD-ROM GD-8000 Rev: 0011
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr1 at scsi1, channel 0, id 1, lun 0
Vendor: HITACHI Model: DVD-ROM GD-8000 Rev: 0011
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr2 at scsi1, channel 0, id 2, lun 0
Vendor: HITACHI Model: DVD-ROM GD-8000 Rev: 0011
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr3 at scsi1, channel 0, id 3, lun 0
Vendor: NEC Model: CD-ROM DRIVE:466 Rev: 1.17
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr4 at scsi2, channel 0, id 5, lun 0
Vendor: HP Model: C1557A Rev: U812
Type: Sequential-Access ANSI SCSI revision: 02
sym53c1010-1-<6,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 31)
Vendor: HP Model: C1557A Rev: U812
Type: Medium Changer ANSI SCSI revision: 02
scsi : detected 5 SCSI cdroms total.
sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.11
sym53c1010-0-<1,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 15)
sr1: scsi3-mmc drive: 17x/40x cd/rw xa/form2 cdda tray
sym53c1010-0-<2,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 15)
sr2: scsi3-mmc drive: 17x/40x cd/rw xa/form2 cdda tray
sym53c1010-0-<3,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 15)
sr3: scsi3-mmc drive: 17x/40x cd/rw xa/form2 cdda tray
sym53c1010-1-<5,*>: FAST-20 SCSI 20.0 MB/s (50 ns, offset 16)
sr4: scsi3-mmc drive: 17x/40x cd/rw xa/form2 cdda tray
Partition check:
rd/c0d0: rd/c0d0p1 rd/c0d0p2 rd/c0d0p3 < rd/c0d0p5 rd/c0d0p6 rd/c0d0p7 >
rd/c0d1: rd/c0d1p1 rd/c0d1p2
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 72k freed
Adding Swap: 265032k swap-space (priority -1)
Adding Swap: 811240k swap-space (priority -2)
st: bufsize 32768, wrt 30720, max buffers 5, s/g segs 16.
Detected scsi tape st0 at scsi2, channel 0, id 6, lun 0
Intel(R) PRO/100 Network Driver - version 2.1.15
Copyright (c) 2002 Intel Corporation
e100: eth0: Intel(R) PRO/100+ Server Adapter (PILA8470B)
Mem:0xfa800000 IRQ:20 Speed:0 Mbps Dx:N/A
Failed to detect cable link
Speed and duplex will be determined at time of connection
Hardware receive checksums enabled
cpu cycle saver enabled
Detected scsi generic sg0 at scsi0, channel 0, id 0, lun 0
Detected scsi generic sg7 at scsi2, channel 0, id 6, lun 1
e100: eth0 NIC Link is Up 100 Mbps Full duplex
/dev/vmmon: Module vmmon: registered with major=10 minor=165
/dev/vmmon: Module vmmon: initialized
parport0: PC-style at 0x378 (0x778) [SPP,ECP,ECPPS2]
ppuser: User-space parallel port driver
/dev/vmnet: open called by PID 717 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: up
bridge-eth0: attached
/dev/vmnet: open called by PID 1257 (vmware)
bridge-eth0: set IFF_PROMISC
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: clear IFF_PROMISC
/dev/vmnet: open called by PID 1257 (vmware)
bridge-eth0: set IFF_PROMISC
/dev/vmnet: port on hub 0 successfully opened
/dev/vmnet: open called by PID 1283 (vmware)
/dev/vmnet: port on hub 0 successfully opened
/dev/vmnet: open called by PID 1283 (vmware)
/dev/vmnet: port on hub 0 successfully opened
VFS: Disk change detected on device sr(11,4)
VFS: Disk change detected on device sr(11,4)
VFS: Disk change detected on device sr(11,4)
VFS: Disk change detected on device sr(11,4)
VFS: Disk change detected on device sr(11,4)
VFS: Disk change detected on device sr(11,4)
VFS: Disk change detected on device sr(11,4)
VFS: Disk change detected on device sr(11,4)
/dev/vmnet: open called by PID 1302 (vmware)
/dev/vmnet: port on hub 0 successfully opened
/dev/vmnet: open called by PID 1302 (vmware)
/dev/vmnet: port on hub 0 successfully opened
VFS: Disk change detected on device sr(11,4)
VFS: Disk change detected on device sr(11,4)
VFS: Disk change detected on device sr(11,4)
VFS: Disk change detected on device sr(11,4)
VFS: Disk change detected on device sr(11,4)
VFS: Disk change detected on device sr(11,4)
VFS: Disk change detected on device sr(11,4)
VFS: Disk change detected on device sr(11,4)
--
tlug Mailingliste
Archiv: http://www.tlug.de/archiv/
http://schwarz.thueday.de/mailman/listinfo/tlug_allgemein