forwarding in 2 subnetzen
i7lema@rz.uni-jena.de
i7lema at rz.uni-jena.de
Fre Feb 18 00:48:04 CET 2000
Hallo Jan-Benedict Glaw,
> Schick mal, was diese Befehle so ausgeben...
> ipchains-save
------------
:input ACCEPT
:forward ACCEPT
:output ACCEPT
Saving `forward'.
-A forward -s 192.168.10.0/255.255.255.0 -d 192.168.8.0/255.255.255.0 -j ACCEPT
-A forward -s 192.168.8.0/255.255.255.0 -d 192.168.10.0/255.255.255.0 -j ACCEPT
s
> ifconfig
eth1 Link encap:Ethernet HWaddr 52:54:00:E3:9F:B0
inet addr:192.168.8.89 Bcast:192.168.8.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:61346 errors:0 dropped:0 overruns:0 frame:0
TX packets:48044 errors:0 dropped:0 overruns:0 carrier:0
collisions:9 txqueuelen:100
Interrupt:9 Base address:0xd000
eth2 Link encap:Ethernet HWaddr 00:50:BA:AF:C0:3C
inet addr:192.168.10.89 Bcast:192.168.10.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:324918 errors:0 dropped:0 overruns:0 frame:0
TX packets:351506 errors:6 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
Interrupt:11 Base address:0xd400
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:3924 Metric:1
RX packets:19848 errors:0 dropped:0 overruns:0 frame:0
TX packets:19848 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
> route -n
192.168.10.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2
192.168.8.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
> cat /proc/sys/net/ipv4/ip_forwarding
cat /proc/sys/net/ipv4/ip_forward
enthält 1 (habe ich auch reingeschrieben...
eth0 habe ich abgeschalten.
--
bye, Leo.
---
Some OS TELL what they can do - Linux DOES it...
---
please visit my homepage at http://www.uni-jena.de/~i7lema